4.12 SunVote Toolkit - base station not connected

If you have trouble connecting your base station to the voting application (the red message 'basestation is not connected' shows at the bottom), you will have to use the toolkit to reconfigure the base ID of your station.

To do this, download the Toolkit rar file from the attachment below.

Once downloaded, right click on the file and unpack. You can unpack this folder anywhere, however, do not unpack this into your SunVote application folder.

Once unpacked, double click on the 'Tool Kit' application file.

This will open the following screen:

To reconfigure the ID of a base station, double click on the Base ID, replace it with another number and press enter. 

Now go to your SunVote application and fill in the corresponding ID, once filled in, your base station should be connected succesfully.